7725SE 3M™ Scotch Cal™ Electro Cut™ Fluorescent Film 400 Series
Thickness: 4.0 mil
Vinyl Type: Cast
Durability: 1-3 years
Finish: High Gloss
Release Liner: Kraft Paper
Printability: Screen Print
App. Temp: Minimum 40°F
Adhesive Type: Permanent, Solvent Acrylic, Pressure-sensitive
These fluorescent films are extremely conspicuous under all daylight conditions and provide the high attention value desired under conditions of poor visibility, particularly at dawn or dusk. Can be used to fabricate non-regulated safety decals and commercial signage or any graphic which must catch the viewers attention. May be applied to flat surfaces and flat surfaces with rivets.
After a material is subjected to the ASTM E-84 test, it is given a rating based on its performance
during the test. Materials are classified into one of three groups based on their tested flame
spread characteristics. These groups and their flame spread indexes are listed below:
Class Flame Spread Index
I (A) 0-25
II (B) 26-75
III (C) 76-200
Product Description
• 3.25-mil, cast fluorescent vinyl film
• For electronic cutting and solvent screen printing
Product Features
• Pressure-sensitive non-removable adhesive
• Five gloss, opaque fluorescent colors
• Extremely conspicuous in daylight, activated by exposure to near-ultra-violet light (not black light)
• Superior cutting and weeding, as small as 0.5 in. (1.27 cm)
• Conforms to flat surfaces both with and without rivets
• Expected performance life of one year (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical,
outdoor surface)
Recommended Types of Graphics and End Uses
• Prespaced and electronically cut graphics
• High-visibility and weather-resistant unprinted or screen-printed graphics